Care & Fix Hub

Everything you need to keep your doll clean, soft, and squishing smoothly.

1. The Mugly Spa Day (Wash & De-Stick)

Silicone and TPR collect dust, lint, and oils over time. Keep your doll fresh, clean, and velvety with a quick bath:

  1. Wash: Clean under lukewarm water with mild dish soap or liquid hand soap.
  2. Pat Dry: Gently dab dry using a paper towel or microfiber cloth.
  3. Powder Coat: Dust lightly with baby powder or cornstarch, then blow off the excess. This eliminates stickiness and restores an ultra-smooth, matte finish.
💡 Pro Tip on Painted Details: Rene's eyebrows and facial details are hand-printed on ultra-stretchy TPR skin. When washing or drying, gently pat the face rather than rubbing or scrubbing with fingernails to protect the paint!

2. Sand Rene: Stiff Mode vs. Soft Mode

They are the exact same doll with the same sand filling! The difference is simply how much air is trapped inside:

🗿 Stiff Mode (Factory Sealed)

How it arrives: Vacuum-sealed at the factory with zero internal air.

  • The Superpower: Locks into hilarious, extreme contortions and holds its pose permanently as a desk sculpture.
  • The Trade-off: Firmer to squeeze; takes more thumb work and kneading to push back into its original shape.
☁️ Soft Mode (Air Introduced)

How to unlock: Introduce a small amount of ambient air using a pin.

  • The Superpower: Sand moves freely with a satisfying, crunchy squish. Super easy to reset back to normal in seconds.
  • The Trade-off: Does not hold extreme, frozen poses as rigidly as stiff mode.
⚠️ IMPORTANT: FOR SAND-FILLED DOLLS ONLY The air method below is exclusively for memory sand dolls. NEVER attempt this on maltose, sugar gel, or liquid-filled dolls. Liquid dolls do not need air, and puncturing them will cause sticky liquid to leak out permanently.
How to Switch Stiff Rene into Soft Rene (30-Second Air Trick):
  1. Flip your doll over and find the thick round rubber injection plug on the bottom. (Never pierce the thin facial or belly skin!)
  2. Take a standard household sewing needle or safety pin.
  3. Insert the pin straight into the center of the rubber plug.
  4. Gently tilt and move the needle sideways (parallel to the surface) to stretch the tiny puncture open for a few seconds. This allows ambient air to naturally flow into the vacuumed chamber.
  5. Pull the needle out (the plug snaps self-sealed) and massage the sand. It will immediately soften up and squish effortlessly.

3. Sand vs. Maltose: Know Your Filling

We use two completely different fillings for distinct sensory experiences:

⏳ Memory Sand Dolls
  • Dense, crunchy, moldable clay-like texture.
  • Holds goofy poses and warped facial expressions.
  • Can be toggled from Stiff to Soft mode using the safety pin trick above.
🍯 Maltose / Liquid Gel Dolls
  • Ultra-stretchy, gummy, taffy-like slow sink.
  • Self-leveling: Slowly creeps back to shape after being pulled.
  • NEVER ADD AIR OR PIERCE: If it feels firm from cold temperatures, warm it in your hands for 60 seconds to soften the syrup.

4. Frequently Asked Questions

Is Sand Stiff Rene a different product from Sand Soft Rene?

No, they are the exact same doll with the exact same memory sand filling. The "Stiff" version is how it comes from the factory—vacuum-sealed with no air so it can freeze in extreme contortions. The "Soft" version simply has a little ambient air introduced via the safety pin trick, which lets the sand flow freely and reset back to normal with ease.

Can I turn my Soft Sand Rene back into Stiff Rene?

Adding air is generally a one-way customization. Because the factory uses specialized vacuum machinery to extract all internal air during production, you cannot easily recreate that zero-air state at home. If you love freezing your Rene in goofy, rigid desk poses, keep it factory stiff. Only introduce air if you prefer a classic, squishy, easy-reset crunch.

Why did the eyebrows or mole start to fade or rub off?

Because Themugly dolls use an ultra-elastic TPR skin designed for extreme stretching, the surface flexes far more than traditional rigid toys. Over time, repeated heavy stretching, friction from thumb pressure, and hand oils will naturally cause surface-painted details (like Rene's eyebrows or facial moles) to wear down.

To protect the paint: Avoid scratching facial features with fingernails, and gently pat the face dry after washing rather than scrubbing vigorously.

Quick DIY Touch-Up: If you want to restore a faded mole or eyebrow, a quick dab with a fine-tip permanent marker (like an ultra-fine Sharpie) will easily bring their goofy expressions right back to life!

Can I do the needle air trick on a maltose or liquid doll?

No, absolutely not. The air trick is strictly for sand-filled dolls. Poking or stretching the plug on a maltose, syrup, or liquid-filled doll will break the internal seal and cause sticky syrup to permanently leak out.

Will stretching the hole cause anything to leak out?

For sand dolls: No, as long as you do it strictly through the bottom rubber injection plug. That plug is reinforced TPR that naturally snaps shut when the pin is removed. Just never poke holes anywhere else on the body.

For liquid/maltose dolls: Yes, it will leak! Liquid dolls should never be pierced under any circumstance.

How do I soften a stiff maltose doll?

Maltose and sugar gels respond directly to temperature. If your doll feels firm after arriving in the mail or sitting in an air-conditioned room, simply warm it between your hands or knead it gently for 1–2 minutes. Natural body heat restores its soft, gooey stretch.